Delta DRP-24V240W1CAN 24V 240W 10A DIN Rail CliQ III Series

Model	Description
DRP-24V240W1CBN	Certified for AC & DC input

Model	Description
DRP-24V240W1CBN	Certified for AC & DC input

Download

Datasheet

Uploaded on 17-Dec-2021

Manual

Uploaded on 09-Dec-2020

Image

Uploaded on 22-Dec-2023

Mechanical Drawing

Uploaded on 22-Apr-2020

.DXF

Uploaded on 22-Apr-2020

.STP

Uploaded on 22-Apr-2020

Certificates

Uploaded on 09-Dec-2020

EAC

Uploaded on 22-Apr-2020

REACH

Uploaded on 09-May-2024

RoHS

Uploaded on 29-May-2024

SIQ

Uploaded on 09-Dec-2020

TSCA

Uploaded on 15-Nov-2023

UKCA

Uploaded on 17-Dec-2021

Uploaded on 09-Dec-2020

GUI Software

Tech Specs

Output Current

10A

Output Voltage

24V

Output Voltage Adjustment Range

24-28Vdc

Output Power

240W

Line Regulation

0.5% (@ 88-264Vac input, 100% load)

Load Regulation

1% (@ 88-264Vac input, 0-100% load)

PARD

100mVpp Max.

Start-up Time

1,000ms Max. @ 24V, 10A

Hold-up Time

24ms Typ. @ 24V, 10A
20ms min. @ 24V, 10A

Dynamic Response (Overshoot & Undershoot O/P Voltage)

± 5% @ 0-100% load
Slew rate 0.1A/µs (@ 5Hz, 50Hz & 1kHz, 50% Duty Cycle)

Start-up with Capacitive Loads

10,000µF

Rise Time

60ms Max. @ 24V, 10A

Power Boost Duration

5 seconds Min.

Power Boost Recovery Time

18 seconds Typ.

Nominal Input Voltage

100-240Vac

Input Voltage Range

88-264Vac

Nominal Input Frequency

50-60Hz

Input Frequency Range

47-63Hz

DC Input Voltage Range

100-375Vdc (Continuously operating, with safety approval according to IEC/EN/UL 60950-1)
88-100Vdc (With power de-rating)

Input Current

2.27A Typ. @ 115 Vac, 1.19A Typ. @ 230Vac

Efficiency at 100% load

92.70% Typ. @ 115Vac, 94.48% Typ. @ 230Vac

Inrush Current

(Cold Start)
11.0A Typ. @ 115Vac, 24.4A Typ. @ 230Vac, 33A Max. @ 115Vac, 65A Max. @ 230Vac

Power Factor at 100% load

0.99 Typ. @ 115Vac, 0.93 Typ. @ 230Vac, 0.99 Min. @ 115Vac, 0.93 Min. @ 230Vac

Leakage Current

(Enclosure to Neutral)
< 0.25mA / 0.80mA: 110Vac, 50Hz, TN/TT system / IT system
< 0.38mA / 1.00mA: 132Vac, 50Hz, TN/TT system / IT system
< 0.74mA / 2.00mA: 264Vac, 50Hz, TN/TT system / IT system

Power Dissipation

At 24V, 0A: 3.54W Typ. @ 115Vac, 2.90W Typ. @ 230Vac, 6.0W Max. @ 115Vac, 6.0W Max. @ 230Vac
At 24V, 10A: 18.97W Typ. @ 115Vac, 14.05W Typ. @ 230Vac, 21.0W Max. @ 115Vac, 16.0W Max. @ 230Vac

Case Chassis / Cover Aluminium
Indicator Green LED (DC OK)
Cooling System Convection
Input Terminal 3 Pins (Rated 600V/35A)
Output Terminal 4 Pins (Rated 300V/28A)
Signal Terminal 2 Pins (Rated 300V/28A)
Noise Sound Pressure Level (SPL) < 25dBA
Input/Output Terminal -
Signal -
Mounting Rail Standard TS35 DIN Rail in accordance with EN 60715
Wire Input: AWG 18-8 Output: AWG 16-12 Signal: AWG 16-12
Protection Structure -
Terminal -
Unit Weight 0.84 kg (1.85 lb)	Dimensions 124 x 60 x 117 mm 4.88” x 2.36” x 4.61”

Operating Temperature

-25°C to +70°C (Cold start -40°C)

Storage Temperature

-40°C to +85°C

Power De-rating

Vertical Mounting: > 60°C de-rate power by 2.5% / °C
Horizontal Mounting: > 40°C de-rate power by 2.5% / °C
Input Voltage:
AC input < 100Vac de-rate power by 0.83% / V
DC input < 100Vdc de-rate power by 1.67% / V

Operating Humidity

5 to 95% RH (Non-Condensing)

Shock Test (Non-Operating)

IEC 60068-2-27, Half Sine Wave: 30G for a duration of 18ms; 3 times per direction, 9 times in total

Vibration (Non-Operating)

IEC 60068-2-6, Sine Wave: 10-500Hz; 3G peak; displacement of 0.35mm; 60 min per axis for all X, Y, Z directions

Operating Altitude

0 to 5,000 Meters (16,400 ft.)

Pollution Degree

Bump Test (Operating)

IEC 60068-2-29, Half Sine Wave: 10G for a duration of 11ms, 1,000 times per direction, 6,000 times in total

Over Voltage Category

III (operating altitude 2,500 Meters)
II (operating altitude 5,000 Meters)
According to IEC/EN 62477-1 / EN 60204-1 (clearance and creepage distances) and IEC 62103 (safety part)

Overvoltage

28.8 - 35.2V, SELV Output, Hiccup Mode, Non-Latching (Auto-Recovery)

Overload / Overcurrent

125 – 170% of rated load current, Constant current, Hiccup Mode (Auto-Recovery)

Over Temperature

< 80°C Surrounding Air Temperature @ 100% load, Non-Latching (Auto-Recovery)

Short Circuit

Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed): Load impedance ≤ 100mOhm

Degree of Protection

IP20

Protection Against Shock

Class I with Primary Earth connection

MTBF

1,366,200 hrs.: I/P: 115Vac, O/P: 24V, 10A, Ta: 25°C
767,400 hrs.: I/P: 115Vac, O/P: 24V, 10A, Ta: 40°C

Expected Cap Life Time

O/P: 24V, 10A, Ta: 25°C: 87,600hrs. @ 115Vac & 230Vac
O/P: 24V, 5A, Ta: 40°C: 87,600hrs. @ 115Vac & 230Vac
O/P: 24V, 10A, Ta: 60°C: 29,000hrs. @ 115Vac, 40,000hrs. @ 230Vac
O/P: 24V, 7.5A, Ta: 60°C: 45,900hrs.@ 115Vac, 62,300hrs. @ 230Vac

Electrical Safety

SIQ Bauart: EN 62368-1
UL/cUL recognized: UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E191395), UL 62368-1 and CSA C22.2 No. 62368-1 (File No. E191395)
CB scheme: IEC 60950-1, IEC 62368-1
UKCA: BS EN 62368-1

In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU

Galvanic Isolation

Input to Output: 4.0 KVac
Input to Ground: 2.0 KVac
Input to DC OK relay contact: 4.0 KVac
Output to Ground: 1.5 KVac
Output to DC OK relay contact: 0.5 KVac
DC OK relay contact to PE: 1.5 KVac

Industrial Control Equipment

UL/cUL listed: UL 508 and CSA C22.2 No. 107.1-01 (File No. E315355)

Electrical Equipments of Machines

EN/BS EN 60204-1 (over voltage category III)

Electrical Equipment for Use in Electrical Power Installations

IEC/EN/BS EN 62477-1 / IEC 62103

Safety Entry Low Voltage

SELV (IEC 60950-1)

PE Resistance

< 0.1 Ohm

UKCA

In conformance with Electrical Equipment (Safety) Regulations 2016 No. 1011 and The Electromagnetic Compatibility Regulations 2016 No. 1091

Emission

(CE & RE)
Generic Standards: EN/BS EN 61000-6-3 CISPR 32, EN/BS EN 55032, CISPR 11, EN/BS EN 55011, FCC Title 47: Class B

Immunity

Generic Standards: EN/BS EN 55024, EN/BS EN 61000-6-2

Harmonic Current Emissions

IEC/EN/BS EN 61000-3-2, Class A

Voltage Fluctuation and Flicker

IEC/EN/BS EN 61000-3-3

Component Power Supply for General Use

EN/BS EN 61204-3

(/3) Item(s) selected

DRP-24V240W1CAN

DIN Rail

CliQ III Series

DRP-24V240W1CAN

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

Unit Weight

Highlights & Features

Tags

Applications

DRP-24V240W1CAN

DRP-24V240W1CAN

DIN Rail

CliQ III Series

DRP-24V240W1CAN

Highlights & Features

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions

Unit Weight

Applications

Tags

Download

Download

Tech Specs

Tech Specs

Looking for support for this product?

Looking for support for this product?

Related Products

DRC-24V015W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 18.0 x 55.0 mm

3.44” x 0.71” x 2.17”

DRC-48V100W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 70 x 55.0 mm

3.44” x 2.76” x 2.17”

DRC-12V060W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 52.5 x 55.0 mm

3.44” x 2.07” x 2.17”

DRC-24V030W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 35.0 x 55.0 mm

3.44” x 1.38” x 2.17”

Subscribe to our newsletter

Products

Applications

Selector

News & Events

Download

Supports

Information

Follow us on social

Subscribe to our newsletter