工业电源
Click the link below to download the file.
Get your files as below link
Dowload link
24V
480W
20A
85-276 Vac
124 x 82 x 127 mm
4.88” x 3.23” x 5.00”
1.40 kg (3.09 lb)
24V
480W
20A
85-276 Vac
124 x 82 x 127 mm
4.88” x 3.23” x 5.00”
1.40 kg (3.09 lb)
输出电流
20A
|
输出电压
24V
|
输出电压范围
24-48Vdc
|
输出电压调整范围
24-28 Vdc (multi-turn VR)
|
输出功率
480W
|
输出电流调整范围
|
最大输出电压
|
缓冲时间
-
|
线电压调整率
< 10 mV (@ 85-276 Vac input, 100% load)
|
负载调整率
< 4.2% (1 V) @ 85-276 Vac input, 0-100% load)
|
纹波电压
< 120 mVpp
|
开机时间
< 1,000 ms @ 100 Vac & 120 Vac & 230 Vac
|
保持时间
78 ms typ. @ 100 Vac & 120 Vac & 230 Vac (24 V, 10 A)
38 ms typ. @ 100 Vac & 120 Vac & 230 Vac (24 V, 20 A) |
动态回应
± 5% @ 0-100% load
Slew rate 0.1 A/µs (@ 5 Hz, 50 Hz & 1 kHz, 50% Duty Cycle) |
电容性负载启动
20,000 µF Max
|
摇控开/关
-
|
保护设备
-
|
输入输出间电压骤降
-
|
残留波纹/PARD (20MHz)
-
|
残留波纹
-
|
最大功率
-
|
波纹与噪音
-
|
CC 型号 LED系统电压范围
-
|
升压时间
< 100 ms @ 100 Vac & 120 Vac & 230 Vac
|
峰值功率持续时间
5 seconds typ.
7 seconds max. |
峰值功率回复时间
17 seconds typ.
|
额定输入电压
100-240 Vac
|
输入电压范围
85-276 Vac
|
最大输入电压
-
|
额定输入频率
50-60 Hz
|
输入频率范围
|
额定直流输入电压
110-300Vdc
|
直流输入电压范围
88-375 Vdc (Continuously operating)
|
输入电流
5.19 A typ. @ 100 Vac
4.31 A typ. @ 120 Vac 2.31 A typ. @ 230 Vac |
输入功率(待机模式)
-
|
100% 负载效率
92.58% typ. @ 100 Vac
93.23% typ. @ 120 Vac 93.78% typ. @ 230 Vac |
最大涌入电流
< 13 A @ 100 Vac & 120 Vac & 230 Vac
|
充电时间
-
|
功率因数
0.99 typ. @ 100 Vac
0.99 typ. @ 120 Vac 0.96 typ. @ 230 Vac |
漏电流
(Enclosure to Neutral)
< 0.40 mA / 0.40 mA @ 110 Vac, 50 Hz, TN/TT system / IT system < 0.48 mA / 0.50 mA @ 132 Vac, 50 Hz, TN/TT system / IT system < 1.10 mA / 1.20 mA @ 264 Vac, 50 Hz, TN/TT system / IT system |
额定电流
-
|
谐波失真总量
-
|
最大功率损耗
At 24 V, 0 A:
< 9.00 W @ 100 Vac < 9.20 W @ 120 Vac < 10.00 W @ 230 Vac At 24 V, 20 A: < 44.00 W @ 100 Vac < 39.60 W @ 120 Vac < 33.00 W @ 230 Vac |
效率 @ 10% 负载
-
|
底座 / 外壳上盖
Aluminium
|
|
指示灯
Green LED: DC OK
Red LED: Overload |
|
冷却方式
Convection
|
|
输入端
3 Pins (Rated 600 V / 35 A)
|
|
输出端
4 Pins (Rated 300 V / 30 A)
|
|
信号端
2 Pins (Rated 300 V / 28 A)
|
|
声压级(SPL)
< 25 dBA
|
|
输入/输出端
-
|
|
信号
-
|
|
安装导轨
Standard TS35 DIN Rail in accordance with EN 60715
|
|
电线
Input: AWG 18-8
Output: AWG 14-10 Signal: AWG 20-12 |
|
保护结构
-
|
|
端子台
-
|
|
重量
1.40 kg (3.09 lb)
|
尺寸
124 x 82 x
127 mm
4.88” x 3.23” x 5.00” |
振动测试(运行状态)
-
|
防震测试(运行状态)
-
|
运行温度
-25°C to +70°C (Cold start -40°C)
|
储存温度
-40°C to +85°C
|
功率降级
Vertical Mounting: > 60°C de-rate power by 2.5% / °C
Horizontal Mounting: > 40°C de-rate power by 2.5% / °C |
运行湿度
5 to 95% RH (Non-Condensing)
|
防震测试(非运行状态)
IEC 60068-2-27, Half Sine Wave: 30 G for a duration of 18 ms; 3 times per direction, 6 times in total
|
振动测试(非运行状态)
IEC 60068-2-6, Sine Wave: 10-500 Hz; 3 G peak; displacement of 0.35 mm; 60 min per axis for all X, Y, Z directions
|
储藏湿度
-
|
运行高度
OVC III: 0 to 2,500 Meters (8,200 ft.)
OVC II: 0 to 5,000 Meters (16,400 ft.) |
污染程度
2
|
碰撞试验(运行状态)
IEC 60068-2-29, Half Sine Wave: 10 G for a duration of 11 ms, 1,000 times per direction, 6,000 times in total
|
过压类别
IEC/EN 62477-1, EN 60204-1, IEC 62103
OVC III: 0 to 2,500 Meters (8,200 ft.) OVC II: 0 to 5,000 Meters (16,400 ft.) IEC/EN 60950-1, IEC/EN 62368-1, IEC 61010-1, IEC 61010-2-201 OVC II: 0 to 5,000 Meters (16,400 ft.) |
Corrosion
ISA S71.04 G3: Yes
|
过压保护
< 30 V, SELV Output, Latch Mode
The output voltage shall be under 2 V within 1 sec at 50% load |
超负载/过电保护
> 150% of rated load current, Constant current, Hiccup Mode (Auto-Recovery)
|
过热保护
< 80°C Surrounding Air Temperature @ 100% load, Non-Latching (Auto-Recovery)
|
短路保护
Hiccup mode, Non-Latching (Auto recovery when the fault is removed)
|
极性反接保护
-
|
防护等级
IP20
|
防震保护
Class I with Primary Earth connection
|
输入端极性保护
-
|
电池极性保护
-
|
电池电压保护错误
-
|
深度放电保护
-
|
超负载保护
-
|
过电保护
-
|
内置保险丝
T 8 A
|
输入欠压保护
-
|
MTBF
Telcordia SR-332: 864,600 hrs.
I/P: 100 Vac, O/P: 24 V, 20 A, Ta: 25°C |
预计最长使用寿命
131,400 hrs. @ I/P: 100 Vac & 230 Vac, O/P: 24 V, 20 A, Ta: 25°C
|
Safety Certificate
-
|
电气安全
SIQ Bauart: EN 62386-1
UL/cUL recognized: UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E191395), UL 62368-1 and CSA C22.2 No. 62368-1 (File No. E191395) CB scheme: IEC 60950-1, IEC 62386-1, IEC 61010-1, IEC 61010-2-201 |
CE
In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU
|
医疗安全
-
|
电隔离
Input / Output: 3.0 kVac
Input / PE: 1.5 kVac Input / DC OK relay contact: 3.0 kVac Output / PE: 0.5 kVac Output / DC OK relay contact: 0.5 kVac DC OK relay contact / PE: 0.5 kVac |
工业控制设备
UL/cUL listed: UL 508 and CSA C22.2 No. 107.1-01 (File No. E315355)
|
危险场所/ATEX
-
|
II 3 G ATEX 2014/34/EU
-
|
机器电气设备
EN 60204-1 (over voltage category III)
|
用於电率安装的电气设备
IEC/EN 62477-1 / IEC 62103
|
安全特低电压
SELV (IEC 60950-1)
|
海事
-
|
材料与部件
-
|
隔离电阻
> 5 mOhm (Input to Output, 500 Vdc)
|
PE 电阻
< 0.1 Ohm
|
UKCA
In conformance with Electrical Equipment (Safety) Regulations 2016 No. 1011 and The Electromagnetic Compatibility Regulations 2016 No. 1091
|
国家地区证书
-
|
BIS
-
|
KC
-
|
Electrical Equipment for Measurement, Control, and Laboratory Use
-
|
ITE Safety
-
|
SIL3
IEC 61508, IEC 61511
Component Type: A PFH [1/h]: - Single power: 1.18E-09 (Corresponds 1.18% of SIL3) - Redundant power: 2.36E-09 (Corresponds < 2.36% of SIL3) PFDavg: - Single power: 7.60E-05 (Corresponds to 7.60% of SIL3; this value is valid for the stated Proof Test Interval T1) - Redundant power: 1.52E-04 (Corresponds to 15.2% of SIL3) SFF: > 60% T1 (Proof Test Interval): 15 years HFT: 1 |
12V
-
4.5A
85-264 Vac
24V
91.92W
3.83A
85-264 Vac
48V
960W
20A
3 x 320-575 Vac
12V
85.2W
7.1A
85-264 Vac