工业电源
Click the link below to download the file.
Get your files as below link
Dowload link
24V
200W
8.33A
85-264Vac
190 x 97 x 38 mm
7.48” x 3.82” x 1.50”
0.61 kg (1.34 lb)
** Discontinued Product **
PMH-24V200WCBJ, PMH-24V200WCBU, PMH-24V200WCBV
Replaced by: PMH-24V200WCBA, PMH-24V200WCBH, PMH-24V200WCBL, PMH-24V200WCBS, PMH-24V200WCBT
Model | Description |
---|---|
PMH-24V200WCBL | Front face |
PMH-24V200WCBH | Harness connector |
PMH-24V200WCBS | Terminal block, output isolated to PE |
PMH-24V200WCBT | Harness connector, output isolated to PE |
** Discontinued Product **
PMH-24V200WCBJ, PMH-24V200WCBU, PMH-24V200WCBV
Replaced by: PMH-24V200WCBA, PMH-24V200WCBH, PMH-24V200WCBL, PMH-24V200WCBS, PMH-24V200WCBT
24V
200W
8.33A
85-264Vac
190 x 97 x 38 mm
7.48” x 3.82” x 1.50”
0.61 kg (1.34 lb)
Model | Description |
---|---|
PMH-24V200WCBL | Front face |
PMH-24V200WCBH | Harness connector |
PMH-24V200WCBS | Terminal block, output isolated to PE |
PMH-24V200WCBT | Harness connector, output isolated to PE |
输出电流
8.33A
|
输出电压
24V
|
输出电压范围
|
输出电压调整范围
22-28Vdc
|
输出功率
200W
|
输出电流调整范围
|
最大输出电压
|
缓冲时间
-
|
线电压调整率
< 0.5% (@ 85-264Vac input, 100% load)
|
负载调整率
< 0.5% (@ 85-264Vac input, 0-100% load)
|
纹波电压
< 100mVpp @ -20°C to 70°C
< 240mVpp @ < -20°C to -30°C |
开机时间
< 1200ms @ 100Vac (100% load)
< 800ms @ 240Vac (100% load) |
保持时间
> 20ms @ 115Vac & 230Vac (100% load)
|
动态回应
± 5% @ 85-264Vac input, 0-100% load
(Slew Rate: 0.1A/μS, 50% duty cycle @ 5Hz to 100Hz) |
电容性负载启动
8,000μF Max
|
摇控开/关
-
|
保护设备
-
|
输入输出间电压骤降
-
|
残留波纹/PARD (20MHz)
-
|
残留波纹
-
|
最大功率
-
|
波纹与噪音
-
|
CC 型号 LED系统电压范围
-
|
升压时间
-
|
峰值功率持续时间
-
|
峰值功率回复时间
-
|
额定输入电压
100-240Vac
|
输入电压范围
85-264Vac
|
最大输入电压
-
|
额定输入频率
50-60Hz
|
输入频率范围
47-63Hz
|
额定直流输入电压
|
直流输入电压范围
120-375Vdc
|
输入电流
< 2.20A @ 115Vac, < 1.2A @ 230Vac
|
输入功率(待机模式)
-
|
100% 负载效率
> 89.5% @ 115Vac, > 91.5% @ 230Vac
|
最大涌入电流
-
|
充电时间
-
|
功率因数
> 0.98 @ 115Vac, > 0.92 @ 230Vac
|
漏电流
< 0.75mA @ 240Vac
|
额定电流
-
|
谐波失真总量
-
|
最大功率损耗
0% load:2.3W typ. @ 115Vac & 230Vac
100% load:23W typ. @ 115Vac & 19W typ. @ 230Vac |
效率 @ 10% 负载
-
|
底座 / 外壳上盖
Aluminium
|
|
指示灯
-
|
|
冷却方式
Convection
|
|
输入端
-
|
|
输出端
-
|
|
信号端
-
|
|
声压级(SPL)
-
|
|
输入/输出端
-
|
|
信号
-
|
|
安装导轨
-
|
|
电线
-
|
|
保护结构
-
|
|
端子台
-
|
|
重量
0.61 kg (1.34 lb)
|
尺寸
190 x 97 x
38 mm
7.48” x 3.82” x 1.50” |
振动测试(运行状态)
-
|
防震测试(运行状态)
-
|
运行温度
-30°C to +70°C
|
储存温度
-30°C to +85°C
|
功率降级
-20°C to -30°C de-rate power by 2.0% / °C
> 45°C de-rate power by 2% / °C |
运行湿度
5 to 95% RH (Non-Condensing)
|
防震测试(非运行状态)
IEC 60068-2-27, 30G (300m/S²) for a duration of 18ms,1 times per direction, 2 times in total
|
振动测试(非运行状态)
IEC 60068-2-6, 10Hz to 150Hz @ 50m/S² (5G peak); displacement of 0.35mm; 20 min per axis for all X, Y, Z direction
|
储藏湿度
-
|
运行高度
-
|
污染程度
2
|
碰撞试验(运行状态)
-
|
过压类别
II
|
Corrosion
-
|
过压保护
28.8-35.2V range, Hiccup Mode,
Non-Latching (Auto-Recovery) |
超负载/过电保护
> 120% of rated load current, Hiccup Mode, Non-Latching (Auto recovery)
|
过热保护
< 75°C Surrounding Air Temperature @ 100% load, Non-Latching (Auto-recovery)
|
短路保护
Hiccup Mode, Non-Latching (Auto-recovery when the fault is removed)
|
极性反接保护
-
|
防护等级
-
|
防震保护
Class I with PE connection
|
输入端极性保护
-
|
电池极性保护
-
|
电池电压保护错误
-
|
深度放电保护
-
|
超负载保护
-
|
过电保护
-
|
内置保险丝
-
|
输入欠压保护
-
|
Safety Certificate
-
|
电气安全
SIQ Bauart: EN 62368-1, EN 60335-1, EN 61558-1, EN 61558-2-16
UL/cUL recognized: UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E191395) UL 62368-1 and CSA C22.2 No. 62368-1 (File No. E191395) CB scheme: IEC 60950-1, IEC 62368-1, IEC 60335-1, IEC 61558-1, IEC 61558-2-16 |
CE
In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU
|
医疗安全
-
|
电隔离
Input to Output : 4.5KVac
Input to Ground : 1.5KVac Output to Ground : Output non-isolated to PE (common pins connect to PE) (PMH-24V200WCBA, PMH-24V200WCBJ, PMH-24V200WCBL, PMH-24V200WCBH) 1.5KVdc (Output isolated to PE) (PMH-24V200WCBS, PMH-24V200WCBU, PMH-24V200WCBV, PMH-24V200WCBT) |
工业控制设备
-
|
危险场所/ATEX
-
|
II 3 G ATEX 2014/34/EU
-
|
机器电气设备
-
|
用於电率安装的电气设备
-
|
安全特低电压
Output non-isolated to PE: PELV (EN 60335), SELV (EN 60950)
Output isolated to PE: SELV (EN 60335), SELV (EN 60950) |
海事
-
|
材料与部件
RoHS Directive 2011/65/EU Compliant
|
隔离电阻
-
|
PE 电阻
-
|
UKCA
In conformance with Electrical Equipment (Safety) Regulations 2016 No. 1011 and
The Electromagnetic Compatibility Regulations 2016 No. 1091 |
国家地区证书
-
|
BIS
-
|
KC
K 60950-1
|
Electrical Equipment for Measurement, Control, and Laboratory Use
-
|
ITE Safety
-
|
SIL3
-
|
48V
240W
5A
90-264 Vac
48V
211.2W
4.4A
180-264 Vac
48V
600W
12.5A
90-264 Vac
24V
240W
10A
90-264 Vac